Many customers do choose to insulate their log cabins, though this is not a service we offer, nor something we can offer much advise on. 

Our cabins are made from 44mm thick timber, which already provides plenty of natural insulation, however we know that some customers may wish to go a bit further and add their own. The most popular option seems to be using 1” thick insulating foam board such as Kingspan and fitting this beneath the roof boards, though you may lose some internal height doing so. 

Please make sure you read through our 10 Year Guarantee terms to see if any changes/additions you make will affect your eligibility: https://www.powersheds.com/10-year-guarantee/ 

You’ll need to ensure you have a sturdy and level base prepared for your log cabin. It is essential that the base is sufficient to support the weight of the building (and the contents!), as well as level to ensure the cabin doesn’t twist and gaps do not appear. 

We have a helpful guide on how to build a variety of shed and log cabin bases on our website to help you figure out the best option for you: https://www.powersheds.com/how-to-build-a-shed-base/ 

The minimum recommended base size can be found on the product specifications section of each product page.  

We do know that some customers may choose to install electrics in their garden building. This is not something we can advise on, and due the risk of fire hazards we recommend seeking a professional to advise and assist in this process.  

Please make sure you read through our 10 Year Guarantee terms to see if any changes/additions you make will affect your eligibility: https://www.powersheds.com/10-year-guarantee/ 

Your log cabin is untreated. It is therefore vital to treat your log cabin as soon as possible after assembly with a high-quality wood preserver. We would recommend applying several coats and try get a good thick layer to the bottom few logs on each side and around all log joints. 

If you wish to treat your log cabin with a paint, you may want to use a clear preserver as well as the paint. Speak to the paint supplier / manufacturer for more details. 

You then need to re-treat the garden building regularly (typically once a year) to ensure the logs and thoroughly protected. We would also recommend treating the inside of your log cabin as well as the outside. 

As with any building, moisture and heat can build up and cause problems with the timber if not controlled properly. Ventilating your log cabin is key to ensuring condensation does not build up and lead to mould/mildew growth. 

You’ll need be aware of this as you decide on what you’ll be using your log cabin for. Any internal heat sources (electrics, fans, humans!) will add to the moisture levels inside the building, and if these are allowed to build up it could start to impact the timber in a way which could have structural repercussions. 

There are a few ways you can ventilate your log cabin to prevent this from happening: 

1. Open the doors and windows: Our cabins are provided with ‘tilt and turn’ uPVC windows, allowing you to ensure a steady airflow which will help ventilate your log cabin. 
2. Vents:  It’s common for customers to undertake work to install a wall vent after their cabin has been assembled. As these do not require power, they’re a popular passive option for ensuring your cabin stays well ventilated. 
3. Electric Fan/Whirligig: Depending on what you’ll be using the cabin for, these can be very good options for keeping the air moving and preventing the build-up of moisture in your log cabin. Electric fans can be a good option if you plan on running power to your cabin, or a Whirligig is a fantastic power-free solution! These are installed in the roof, usually towards the center, and utilize a wind-turbine to force airflow into the building. 

How long the installation will take is dependent on the number and experience of people assisting you. It will also vary depending on the size of the log cabin. Based on a team of two people with limited-no experience, you can expect an average of 6-8 hours for your build. 

It’s hard to advise precisely on this matter as there are many factors (e.g. weather, ground/surface level, experience) which can affect the timescale, but with our interlocking log system we have tried to make the process as simple as possible! 

Please refer to the installation video on our website for more information –

You should ensure that adequate space is left on all sides of the cabin to allow you to apply the annual treatment and perform any maintenance required. 

Your log cabin is untreated. It is therefore vital to treat your log cabin as soon as possible after assembly with a high-quality wood preserver.
We would recommend applying several coats and try get a good thick layer to the bottom few logs on each side and around all log joints. 

If you wish to treat your log cabin with a paint, you may want to use a clear preserver as well as the paint. Speak to the paint supplier / manufacturer for more details. 

You then need to re-treat the garden building regularly (typically once a year) to ensure the logs and thoroughly protected.
We would also recommend treating the inside of your log cabin as well as the outside. 

You will also want to ensure that there is no debris build-up on the roof of your cabin, and that no branches are touching the felt. This can degrade or damage the felt and lead to water pooling or water ingress.